The Gift of Sight…

It’s now fairly easy for me to build a robot that can do stuff. Drive around, balance on two wheels, pick up things, drive around some more, transmit video, obey orders, drive some more. While learning all this stuff this has been great fun, robots that just DO things are not much challenge anymore. So I have spent the last few months learning to make my robots more clever, building robots than can observe their environment, make intelligent decisions and re-configure themselves to interact optimally with external stimuli.

For me, vision processing was an easy first choice in trying to build intelligent robotics. The OpenCV library is an incredibly powerful library that one can download for free. OpenCV makes implementing computer based vision extremely easy and once you get more familiar with image processing, you start to see that most operations are just elementary arithmetic operations on matrices. Operations like background subtraction, edge detection, blob detection, kalman filtering and the extremely useful Hungarian Algorithm are all just simple matrix operations. OpenCV is a little tricky to learn, but once you get the hang of it, it’s supremely powerful when it comes to doing interesting things with visual data. I owe thanks for much of what I know about OpenCV to Kyle Hounslow. His video tutorials are a super easy way to get started with OpenCV.

A couple of months ago I used the OpenCV library to build a webcam based vision capable robotic arm. I used Qt and OpenCV to implement the video capture and frame processing.The idea here is to get the computer to track the green ball and then send the correct spatial coordinates to the robot arm which would then follow the ball in space. I used my 6 DOF robot arm and ArduinoTalker c++ class to perform the motion following in the “real” world. The movements are shaky because I was too lazy to implement any smoothing algorithm and the very obvious parallax error is because the camera is fitted to the laptop screen and not onto the arm itself.

Continue reading

Advertisements

Experimental Robotic Platform Part 3: Wireless Commands and Remote Control

In this post I outline the progress made on ERP1 (Construction and basic electronics onboard ERP1 can be reviewed here) over the past few weeks…

ERP 1. Wireless Mobile Robot

ERP 1. Wireless Mobile Robot

The robotic arm is now fully operational. It has 6 Degrees of Freedom and can be controlled remotely from any laptop running the interface software.The robotic hand is capable of simple tasks such as lifting and carrying small objects. I have attached a wireless AV camera to the robotic hand. A human operator can now “see” what the robot is doing and issue commands accordingly over the wireless data link.

Continue reading